View CLD-DS60_8442903.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CLD-DS60 rev 0a product family data sheet cree ? xlamp ? mk-r leds www.cr ee.com/xlamp copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. product description built on crees revolutionary sc3 technology? platform, the xlamp mk -r le d brings new levels of price and performance to directional le d arrays, enabling lighting manufacturers to create the next generation of high-lumen indoor and outdoor l e d lighting systems. in single-l e d systems, the xlamp mk -r, with e asywhite? color binning, provides the l e d industrys tightest unit-to-unit color consistency. for systems using multiple l e ds, the mk-r enables manufacturers to use fewer le ds while maintaining light output and color consistency, which translates to lower system cost. the xlamp mk - r is optimized for directional lighting applications and is a welcome addition to applications requiring high lumen output, a compact optical source and a broad palette of color temperature and cri values. features ? available in ansi white bins as well as 4-step and 2-step easywhite bins at 2700 k, 3000 k, 3500 k, 4000 k, 4500 k and 5000 k cct ? maximum drive current: 1250 ma ? low thermal resistance: 1.7 c/w ? maximum junction temperature: 150 c ? binned at 85 c ? viewing angle: 120 ? available in cool white, 70-, 80- and 90-cri minimums ? unlimited foor life at 30 oc/85% rh ? refow solderable - jedec j- std-020c ? e lectrically neutral thermal path cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 table of contents characteristics ............................ 2 flux characteristics, standard order codes and bins .................. 2 standard order codes and bins ..... 3 relative spectral power distribution ................................. 4 relative flux vs. junction temperature ............................... 4 e lectrical characteristics ............... 5 thermal design ........................... 5 relative flux vs. current .............. 6 relative chromaticity vs. current ... 6 relative chromaticity vs. temperature ............................... 7 typical spatial distribution ............ 7 performance groups - brightness ... 8 performance groups - chromaticity ............................... 9 cree easywhite bins plotted on the 1931 cie color space ................. 12 cree ansi white bins plotted on the 1931 cie color space ............ 13 bin and order code formats ........ 14 refow soldering characteristics ... 15 notes ........................................ 16 mechanical dimensions ................ 17 tape and reel ............................ 18 packaging .................................. 19
2 2 characteristics characteristics unit minimum typical maximum thermal resistance, junction to solder point c/w 1.7 viewing angle - full width half maximum (fwhm) degrees 120 temperature coeffcient of voltage mv/c -7 esd classifcation (hbm per mil-std-883d) class 2 dc forward current ma 1250 reverse voltage v -5 forward voltage (@ 700 ma, 85 c) v 11.7 14 le d junction temperature c 150 flux characteristics, standard order codes and bins (i f = 700 ma, t j = 85 c) the following tables provide order codes for xlamp mk -r e asywhite le ds. for a complete description of the order code nomenclature, please reference bin and order code formats (page 14). color cct range base order codes min. luminous flux @ 700 ma 2-step order code 4-step order code group flux (lm) @ 85 c flux (lm) @ 25 c* chromaticity region chromaticity region 80-cri easywhite 5000 k h2 900 1044 50h mkrawt-00-0000-0d0hh250h 50f mkrawt-00-0000-0d0hh250f g4 840 974 mkrawt-00-0000-0d0hg450h mkrawt-00-0000-0d0hg450f 4500 k h2 900 1044 45h mkrawt-00-0000-0d0hh245h 45f mkrawt-00-0000-0d0hh245f g4 840 974 mkrawt-00-0000-0d0hg445h mkrawt-00-0000-0d0hg445f 4000 k h2 900 1044 40h mkrawt-00-0000-0d0hh240h 40f mkrawt-00-0000-0d0hh240f g4 840 974 mkrawt-00-0000-0d0hg440h mkrawt-00-0000-0d0hg440f 3500 k h2 900 1044 35h mkrawt-00-0000-0d0hh235h 35f mkrawt-00-0000-0d0hh235f g4 840 974 mkrawt-00-0000-0d0hg435h mkrawt-00-0000-0d0hg435f 3000 k g4 840 974 30h mkrawt-00-0000-0d0hg430h 30f mkrawt-00-0000-0d0hg430f g2 780 905 mkrawt-00-0000-0d0hg230h mkrawt-00-0000-0d0hg230f 2700 k g2 780 905 27h mkrawt-00-0000-0d0hg227h 27f mkrawt-00-0000-0d0hg227f f4 730 847 mkrawt-00-0000-0d0hf427h mkrawt-00-0000-0d0hf427f 90-cri easywhite 3000 k e4 635 737 30h mkrawt-00-0000-0d0ue430h 30f mkrawt-00-0000-0d0u e430f e2 590 684 mkrawt-00-0000-0d0ue230h mkrawt-00-0000-0d0u e230f 2700 k e2 590 684 27h mkrawt-00-0000-0d0ue227h 27f mkrawt-00-0000-0d0u e227f d4 550 638 mkrawt-00-0000-0d0ud427h mkrawt-00-0000-0d0ud427f notes: ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. ? minimum cri for 80-cri white is 80. ? minimum cri for 90-cri white is 90. * flux values @ 25 c are calculated and for reference only. xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
3 3 standard order codes and bins, ansi white (i f = 700 ma, t j = 85 c) xlamp mk-r standard ansi kit codes chromaticity minimum luminous flux (lm) @ 700 ma** order codes kit cct code flux (lm)@ 85 c flux (lm) @ 25 c* 65 cri typical 70 cri minimum 80 cri minimum 90 cri minimum ansi white (2700 k - 8300 k) 51 6200 k j2 1040 1206 mkrawt-00-0000-0d00j2051 h4 970 1125 mkrawt-00-0000-0d00h4051 mkrawt-00-0000-0d0bh4051 h2 900 1044 mkrawt-00-0000-0d0bh2051 e1 6500 k j2 1040 1206 mkrawt-00-0000-0d00j20e1 h4 970 1125 mkrawt-00-0000-0d00h40e1 mkrawt-00-0000-0d0bh40e1 h2 900 1044 mkrawt-00-0000-0d0bh20e1 e2 5700 k j2 1040 1206 mkrawt-00-0000-0d00j20e2 h4 970 1125 mkrawt-00-0000-0d00h40e2 mkrawt-00-0000-0d0bh40e2 h2 900 1044 mkrawt-00-0000-0d0bh20e2 e3 5000 k h4 970 1125 mkrawt-00-0000-0d00h40e3 mkrawt-00-0000-0d0bh40e3 h2 900 1044 mkrawt-00-0000-0d00h20e3 mkrawt-00-0000-0d0bh20e3 mkrawt-00-0000-0d0hh20e3 g4 840 974 mkrawt-00-0000-0d0hg40e3 e4 4500 k h4 970 1125 mkrawt-00-0000-0d00h40e4 mkrawt-00-0000-0d0bh40e4 h2 900 1044 mkrawt-00-0000-0d00h20e4 mkrawt-00-0000-0d0bh20e4 mkrawt-00-0000-0d0hh20e4 g4 840 974 mkrawt-00-0000-0d0hg40e4 e5 4000 k h2 900 1044 mkrawt-00-0000-0d00h20e5 mkrawt-00-0000-0d0bh20e5 mkrawt-00-0000-0d0hh20e5 g4 840 974 mkrawt-00-0000-0d00g40 e5 mkrawt-00-0000-0d0bg40 e5 mkrawt-00-0000-0d0hg40e5 e6 3500 k h2 900 1044 mkrawt-00-0000-0d0bh20e6 mkrawt-00-0000-0d0hh20e6 g4 840 974 mkrawt-00-0000-0d0bg40 e6 mkrawt-00-0000-0d0hg40e6 e7 3000 k g4 840 974 mkrawt-00-0000-0d0hg40e7 g2 780 905 mkrawt-00-0000-0d0hg20e7 f4 730 847 f2 680 789 e4 635 737 mkrawt-00-0000-0d0u e40e7 e2 590 684 mkrawt-00-0000-0d0u e20e7 e8 2700 k g2 780 905 mkrawt-00-0000-0d0hg20e8 f4 730 847 mkrawt-00-0000-0d0hf40e8 f2 680 789 e4 635 737 e2 590 684 mkrawt-00-0000-0d0u e20e8 d4 550 638 mkrawt-00-0000-0d0ud40 e8 ** cree xlamp mk -r order codes specify only a minimum fux bin and not a maximum. cree may ship reels in fux bins higher than the minimum specifed by the order code without advance notice. shipments will always adhere to the chromaticity restrictions specifed by the order code. * flux values @ 25 c are calculated and for reference only. ? for information on chromaticity bins contained in the kits listed above, please reference the performance groups - chromaticity section starting on page 8. ? minimum cri for 70-cri white is 70. xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
4 4 relative spectral power distribution relative flux vs. junction temperature (i f = 700 ma) relative spectral power 0 20 40 60 80 100 380 430 480 530 580 630 680 730 780 relative radiant power (%) wavelength (nm) cool white neutral white warm white relative flux output vs. junction temperature 0 20 40 60 80 100 120 25 50 75 100 125 150 relative luminous flux (%) junction temperature (oc) xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
5 5 electrical characteristics (t j = 85 c) thermal design the maximum forward current is determined by the thermal resistance between the l e d junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. electrical characteristics (tj = 85oc) 0 250 500 750 1000 1250 10. 0 10.5 11. 0 11. 5 12.0 12. 5 forward current (ma) forward voltage (v) thermal design 0 200 400 600 800 1000 1200 1400 0 20 40 60 80 100 120 140 maximum current (ma) ambient temperature (oc) rj - a = 2 c/w rj - a = 4 c/w rj - a = 6 c/w rj - a = 8 c/w xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
6 6 relative flux vs. current (t j = 85 c) relative chromaticity vs. current - warm white (t j = 85 c) relative intensity vs. current (tj = 85oc) 0 30 60 90 120 150 180 0 250 500 750 1000 1250 relative luminous flux (%) forward current (ma) relative chromaticity vs. current - warm white - 0 . 004 - 0 . 002 0.000 0 . 002 0.004 0 250 500 750 1000 1250 current (ma) ccx ccy xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
7 7 relative chromaticity vs. temperature - warm white (i f = 700 ma) typical spatial distribution relative chromaticity vs. temperature - warm white ccx - 0 . 004 - 0.002 0 . 000 0.002 0 . 004 0 25 50 75 100 125 150 tsp ( c) ccx ccy typical spatial radiation pattern 0 20 40 60 80 100 - 100 - 80 - 60 - 40 - 20 0 20 40 60 80 100 relative luminous intensity (%) angle (o) xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
8 8 performance groups - brightness (i f = 700 ma, t j = 85 c) xlamp mk-r leds are tested for luminous fux and placed into one of the following bins. group code min. luminous flux @ 700 ma max. luminous flux @ 700 ma d2 510 550 d4 550 590 e2 590 635 e4 635 680 f2 680 730 f4 730 780 g2 780 840 g4 840 900 h2 900 970 h4 970 1040 j2 1040 1120 j4 1120 1200 k2 1200 1290 xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
9 9 performance groups - chromaticity (t j = 85 c) xlamp mk -r leds are tested for chromaticity and placed into one of the regions defned by the following bounding coordinates. easywhite color temperatures C 4-step code cct x y 50f 5000 k 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 45f 4500 k 0.3674 0.3772 0.3582 0.3710 0.3562 0.3573 0.3642 0.3625 40f 4000 k 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3758 35f 3500 k 0.3981 0.3800 0.4040 0.3966 0.4186 0.4037 0.4116 0.3865 30f 3000 k 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 27f 2700 k 0.4475 0.3994 0.4573 0.4178 0.4695 0.4207 0.4586 0.4021 easywhite color temperatures C 2-step code cct x y 50h 5000 k 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 45h 4500 k 0.3643 0.3720 0.3597 0.3689 0.3587 0.3620 0.3628 0.3647 40h 4000 k 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3844 0.3778 35h 3500 k 0.4030 0.3857 0.4061 0.3941 0.4132 0.3976 0.4099 0.3890 30h 3000 k 0.4291 0.3973 0.4333 0.4062 0.4395 0.4084 0.4351 0.3994 27h 2700 k 0.4528 0.4046 0.4578 0.4138 0.4638 0.4152 0.4586 0.4060 xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
10 10 performance groups - chromaticity (t j = 85 c) - continued ansi white bins code cct bin code x y bin code x y bin code x y bin code x y 051 6200 k 0a0 0.2920 0.3060 0r0 0.2950 0.2970 1a0 0.3048 0.3207 1r0 0.3068 0.3113 0.2984 0.3133 0.3009 0.3042 0.3130 0.3290 0.3144 0.3186 0.3009 0.3042 0.3037 0.2937 0.3144 0.3186 0.3161 0.3059 0.2950 0.2970 0.2980 0.2880 0.3068 0.3113 0.3093 0.2993 0b0 0.2895 0.3135 0s0 0.2870 0.3210 1b0 0.3028 0.3304 1s0 0.3005 0.3415 0.2962 0.3220 0.2937 0.3312 0.3115 0.3391 0.3099 0.3509 0.2984 0.3133 0.2962 0.3220 0.3130 0.3290 0.3115 0.3391 0.2920 0.3060 0.2895 0.3135 0.3048 0.3207 0.3028 0.3304 0c0 0.2962 0.3220 0t0 0.2937 0.3312 1c0 0.3115 0.3391 1t0 0.3099 0.3509 0.3028 0.3304 0.3005 0.3415 0.3205 0.3481 0.3196 0.3602 0.3048 0.3207 0.3028 0.3304 0.3213 0.3373 0.3205 0.3481 0.2984 0.3133 0.2962 0.3220 0.3130 0.3290 0.3115 0.3391 0d0 0.2984 0.3133 0u0 0.3009 0.3042 1d0 0.3130 0.3290 1u0 0.3144 0.3186 0.3048 0.3207 0.3068 0.3113 0.3213 0.3373 0.3221 0.3261 0.3068 0.3113 0.3093 0.2993 0.3221 0.3261 0.3231 0.3120 0.3009 0.3042 0.3037 0.2937 0.3144 0.3186 0.3161 0.3059 ansi white bins code cct bin code x y bin code x y bin code x y 051 6200 k 2a0 0.3215 0.3350 2r0 0.3222 0.3243 3a0 .3371 .3490 0.3290 0.3417 0.3290 0.3300 .3451 .3554 0.3290 0.3300 0.3290 0.3180 .3440 .3427 0.3222 0.3243 0.3231 0.3120 .3366 .3369 2b0 0.3207 0.3462 2s0 0.3196 0.3602 3b0 .3376 .3616 0.3290 0.3538 0.3290 0.3690 .3463 .3687 0.3290 0.3417 0.3290 0.3538 .3451 .3554 0.3215 0.3350 0.3207 0.3462 .3371 .3490 2c0 0.3290 0.3538 2t0 0.3290 0.3690 3c0 .3463 .3687 0.3376 0.3616 0.3381 0.3762 .3551 .3760 0.3371 0.3490 0.3376 0.3616 .3533 .3620 0.3290 0.3417 0.3290 0.3538 .3451 .3554 2d0 0.3290 0.3417 2u0 0.3290 0.3300 3d0 .3451 .3554 0.3371 0.3490 0.3366 0.3369 .3533 .3620 0.3366 0.3369 0.3361 0.3245 .3515 .3487 0.3290 0.3300 0.3290 0.3180 .3440 .3427 xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
11 11 performance groups - chromaticity (t j = 85 c) - continued ansi white bins code cct bin code x y 0e3 5000 k 3a0 .3371 .3490 .3451 .3554 .3440 .3427 .3366 .3369 3b0 .3376 .3616 .3463 .3687 .3451 .3554 .3371 .3490 3c0 .3463 .3687 .3551 .3760 .3533 .3620 .3451 .3554 3d0 .3451 .3554 .3533 .3620 .3515 .3487 .3440 .3427 ansi white bins code cct bin code x y 0e2 5700 k 2a0 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300 0.3222 0.3243 2b0 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3215 0.3350 2c0 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490 0.3290 0.3417 2d0 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369 0.3290 0.3300 ansi white bins code cct bin code x y 0e1 6500 k 1a0 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186 0.3068 0.3113 1b0 0.3028 0.3304 0.3115 0.3391 0.3130 0.3290 0.3048 0.3207 1c0 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373 0.3130 0.3290 1d0 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261 0.3144 0.3186 ansi white bins code cct bin code x y 0e5 4000 k 5a0 .3670 .3578 .3702 .3722 .3825 .3798 .3783 .3646 5b0 .3702 .3722 .3736 .3874 .3869 .3958 .3825 .3798 5c0 .3825 .3798 .3869 .3958 .4006 .4044 .3950 .3875 5d0 .3783 .3646 .3825 .3798 .3950 .3875 .3898 .3716 ansi white bins code cct bin code x y 0e6 3500 k 6a0 .3889 .3690 .3941 .3848 .4080 .3916 .4017 .3751 6b0 .3941 .3848 .3996 .4015 .4146 .4089 .4080 .3916 6c0 .4080 .3916 .4146 .4089 .4299 .4165 .4221 .3984 6d0 .4017 .3751 .4080 .3916 .4221 .3984 .4147 .3814 ansi white bins code cct bin code x y 0e4 4500 k 4a0 .3530 .3597 .3615 .3659 .3590 .3521 .3512 .3465 4b0 .3548 .3736 .3641 .3804 .3615 .3659 .3530 .3597 4c0 .3641 .3804 .3736 .3874 .3702 .3722 .3615 .3659 4d0 .3668 .3957 .3771 .4034 .3736 .3874 .3641 .3804 xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
12 12 performance groups - chromaticity (t j = 85 c) - continued cree easywhite bins plotted on the 1931 cie color space (t j = 85 c) ansi white bins code cct bin code x y 0e7 3000 k 7a0 .4147 .3814 .4221 .3984 .4342 .4028 .4259 .3853 7b0 .4221 .3984 .4299 .4165 .4430 .4212 .4342 .4028 7c0 .4342 .4028 .4430 .4212 .4562 .4260 .4465 .4071 7d0 .4259 .3853 .4342 .4028 .4465 .4071 .4373 .3893 ansi white bins code cct bin code x y 0e8 2700 k 8a0 .4373 .3893 .4465 .4071 .4582 .4099 .4483 .3919 8b0 .4465 .4071 .4562 .4260 .4687 .4289 .4582 .4099 8c0 .4582 .4099 .4687 .4289 .4813 .4319 .4700 .4126 8d0 .4483 .3919 .4582 .4099 .4700 .4126 .4593 .3944 2700k 3000k 3500k 4000k 4500k 5000k 5700k 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 ccy ccx ansi c78.377 quadrangle easywhite 4 - step easywhite 2 - step xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
13 13 cree ansi white bins plotted on the 1931 cie color space (t j = 85 c) 2600k 2700k 2900k 3000k 3200k 3500k 3700k 4000k 4300k 4500k 4750k 5000k 5300k 3a 3b 3c 3d 4a 4b 4c 4d 5a 5b 5c 5d 6a 6b 6c 6d 7a 7b 7c 7d 8a 8b 8c 8d 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 ccy ccx ansi c78.377a 5000k 5700k 6500k 8000k 0a 0b 0c 0d 0r 0s 0t 0u 1a 1b 1c 1d 2a 2b 2c 2d 3a 3b 1r 1s 1t 1u 2r 2s 2t 2u 3r 3s 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 ccy ccx ansi c78.377a xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
14 14 bin and order code formats bin codes and order codes are confgured as follows. order code bin code sss ccc -hh-hhhh-ghklnnnnn series = mk r internal code fo rward voltage clas s d = default (12 v) cri specification b = 70-cri minimu m h = 80-cri minimu m u = 90-cri minimu m 0 = no minimu m kit code internal code color aw t = white sss ccc -e-ddd-mm-hk -l -pp series = mk r internal code luminous flux grou p internal code cri specification b = 70-cri minimu m h = 80-cri minimu m u = 90-cri minimu m 0 = no minimu m fo rward voltage clas s d = default (12 v) chromaticity bi n color aw t = white xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
15 15 reflow soldering characteristics in testing, cree has found xlamp mk-r leds to be compatible with jedec j-std-020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profle feature lead-based solder lead-free solder average ramp-up rate (ts max to tp) 3 c/second max. 3 c/second max. preheat: temperature min (ts min ) 100 c 150 c preheat: temperature max (ts max ) 150 c 200 c preheat: time (ts min to ts max ) 60-120 seconds 60-180 seconds time maintained above: temperature (t l ) 183 c 217 c time maintained above: time (t l ) 60-150 seconds 60-150 seconds peak/classifcation temperature (tp) 215 c 260 c time within 5 c of actual peak temperature (tp) 10-30 seconds 20-40 seconds ramp-down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
16 16 notes l umen m aintenance projections cree now uses standardized i e s lm-80-08 and tm-21-11 methods for collecting long-term data and extrapolating led lumen maintenance. for information on the specifc lm-80 data sets available for this led, refer to the public lm-80 results document at www.cree.com/xlamp_app_notes/lm80_results. please read the xlamp long-term lumen maintenance application note at www.cree.com/xlamp_app_notes/lumen_ maintenance for more details on crees lumen maintenance testing and forecasting. please read the xlamp thermal management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal design, ambient temperature, and drive current affect the l e d junction temperature. m oisture s ensitivity in testing, cree has found xlamp mk -r leds to have unlimited foor life in conditions 30 oc/85% relative humidity (rh). moisture testing included a 168-hour soak at 85 oc/85% rh followed by 3 refow cycles, with visual and electrical inspections at each stage. cree recommends keeping xlamp l e ds in their sealed moisture-barrier packaging until immediately prior to use. cree also recommends returning any unused l e ds to the resealable moisture-barrier bag and closing the bag immediately after use. v ision a dvisory c laim warning: do not look at exposed lamp in operation. e ye injury can result. see the e ye safety application note at www. cree.com/xlamp_app_notes/led_eye_safety. xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
17 17 mechanical dimensions all measurements are .13 mm unless otherwise indicated. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 7.000 7.000 .73 4.08 r 3.250 6.76 .70 .70 6.70 .70 3.90 6.55 5.27 .55 3.00 1.23 6.70 6.70 .70 .70 3.90 1 / 1 11.000 a 2610-00031 mkr marketing spec 11/7/12 d. cronin revisons rev description by date app'd recommended stencil pattern shaded area is open recommended pcb solder pad top view bottom view side view recommended pcb solder pad recommended stencil pattern (shaded area is open) anode size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 7.000 7.000 .73 4.08 r 3.250 6.76 .70 .70 6.70 .70 3.90 6.55 5.27 .55 3.00 1.23 6.70 6.70 .70 .70 3.90 1 / 1 11.000 a 2610-00031 mkr marketing spec 11/7/12 d. cronin revisons rev description by date app'd recommended stencil pattern shaded area is open recommended pcb solder pad size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 7.000 7.000 .73 4.08 r 3.250 6.76 .70 .70 6.70 .70 3.90 6.55 5.27 .55 3.00 1.23 6.70 6.70 .70 .70 3.90 1 / 1 11.000 a 2610-00031 mkr marketing spec 11/7/12 d. cronin revisons rev description by date app'd recommended stencil pattern shaded area is open recommended pcb solder pad size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 7.000 7.000 .73 4.08 r 3.250 6.76 .70 .70 6.70 .70 3.90 6.55 5.27 .55 3.00 1.23 6.70 6.70 .70 .70 3.90 1 / 1 11.000 a 2610-00031 mkr marketing spec 11/7/12 d. cronin revisons rev description by date app'd recommended stencil pattern shaded area is open recommended pcb solder pad xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
18 18 tape and reel all cree carrier tapes conform to eia-481d, automated component handling systems standard. all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 180mm (min) of empty pockets sealed with tape (15 pockets min.) loaded pockets (1000 lamps) 12.1 4.31 16 +.3 -.0 1.75 .10 4.10 leader 420mm (min) of empty pockets sealed with tape (35 pockets min.) 7.4 0.36 " 13 13mm 1 / 1 3.000 a 2402-00025 mkr loading spec -- -- -- -- -- -- 12/7/12 d. cronin revisons rev description by date app'd a initial release dc 12/7/12 end start user feed direction cathode side anode side user feed direction 1.5 .1 xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.
19 19 packaging label with cree bin code, qty, lot # label with cree bin code, qty, lot # vacuum-sealed moisture barrier bag dessicant (inside bag) humidity indicator card (inside bag) patent label label with customer order code, qty, reel id, po # patent label label with cree bin code, qty, reel id label with cree bin code, qty, reel id label with cree order code, qty, reel id, po # label with cree order code, qty, reel id, po # label with cree bin code, qty, reel id unpackaged reel packaged reel boxed reel xlamp mk-r leds copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. copyright ? 2012 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , the cree logo and xlamp ? are registered trademarks and easywhite? and sc 3 technology? are trademarks of cree, inc.

▲Up To Search▲

Price & Availability of CLD-DS60

	To Download CLD-DS60 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .